Adexa HBS-220A, Instruction Manual

Page: 13 / 23

4. Carefully lift off the blade cover.
5. Attach the blade removal tool by placing it over the blade and screweing two
bolts into the corresponding holes in the balde.
6.Unscrew the 3 screws holding the blade, leaving it sat on the slicer.
7.Lift the blade off the slicer using the knobs of the blade removal tool as handles.
8.Wash the blade by wiping from the centre towards the edge. Keep the removal tool
in place when cleaning. If necessary, wipe clean the face of the blade once it has been
reattached.
9. Dry thoroughly.
10.Replace the blade and cover, ensuring the blade securing bolt is securely tightened.
We recommend the use of cut-resistant wire mesh gloves when cleaning the blade.