NL
SAFE BLADE REMOVAL TOOL
The blade cleaning must be carried out with metal gloves and a wet cloth!
Unplug the slicer from the power supply.
Remove the blade guard cover by unscrewing the pin at the back of the appliance.
Place and fit the supplied blade removal tool with the notch at the right top side.
Rotate and align the 2 screw holes on the blade with the 2 screw handles of the blade
removal tool.
Then, screw and tighten 2 handles of the blade removal tool into the blade and locking it
into place.
Unscrew the screws that fasten the blade to the appliance.
Lift the blade removal tool with the 2 handles to remove the blade.
Keep the blade removal tool in place when clean- ing.
Refit and reinstall the blade in reverse after cleaning.
Summary of Contents for HBS-220A
