background image

................................................................

Care and Cleaning

Remove power cord from electrical outlet. Do not immerse in liquid. Check 

Gaskets and around Drip Tray to make sure they are free from food materials. 

Wipe off Gasket with warm soapy cloth if needed. Upper and Lower Gaskets 

may be removed for cleaning. Clean with warm, soapy water.

Empty Drip Tray after each use. Wash in warm soapy water or place in top rack 

of dishwasher. Dry thoroughly before re-inserting into the appliance.

Always leave lid latch in open position. Never store lid in latched position as 

gaskets may become compressed. When appliance is left in closed position, 

the Gaskets become compressed and the unit may not function properly.

Guarantee  Card 

Thank you for choosing us, If there are some unexpected causes of your distress 

and dissatisfaction, please be sure to contact us, we will give you a Satisfactory 

answer, thanks again! 

User Information

Customer Address

Maintenance

Production Model 

Number

Factory Serial 

Number

Purchase Date

Customer Name

Customer Phone

Repair date

Trouble and maintenance 

description

Completion date Customer signature

-  8  -

-  9  -

Summary of Contents for GN1088







Reviews: