Adexa EPC4T Instruction Manual Download Page 3

Instruction Manual 

 

 

 

This PASTA COOKER is a plug-in product but commercial safety regulations require additional earthing to be 

carried out.  

Only a suitably qualified technician should install the product.  

There is an earth bolt at the back of the fryer .     

 Complying fully with safety regulations, connect the earth wire with suitable Cable.  

A suitable switch, fuse breaker and plug socket should be installed near the grill. 

You may see smoke coming from the elements when the machine is first switched on, this is normal. 

       

WARNING: RISK OF SEVERE BURNS. When used,parts of the pasta cooker will be hot to the touch. 

1. 

Before using this product, ensure that the electricity supply conforms to the rating markings on the pasta 

cooker and check there 

is no damage to the power cord. 

2. 

Always ensure the element element cover is in place within the water tank. It sits on top of the heating 

element and is designed to protect it. 

3. 

Add water to the tank. Be aware of the water indication marks. For safe operation of the product, 

DO NOT 

allow the level of oil to exceed the 'H' High mark when adding oil. The water level MUST also exceed the 'L' low 

mark for safe usage. 

4. 

Ensure the pasta cooker is plugged into the socket and that power is switched on. The green power indicator 

lights up. 

5. 

Rotate the temperature control clockwise to required setting. A yellow, thermostat indicator lights up showing 

that the oil is being heated. The green power indicator remains lit. 

6. 

When the water reaches the selected temperature the yellow, thermostat indicator goes out. The light will 

cycle on and off as the thermostat maintains the selected temperature of the oil. 

7. 

The cooking basket is for cooking small food items . Before using ensure the handle is securely locked in 

place. 

8. 

If the cooking temperature gets too high, an overheat facility will cut in and turn the pasta cooker off.  Seek 

advice from a qualified technician if the overheat facility repeatedly cuts in. 

9. 

When the machine is completed, the temperature control must be 

turned anti clockwise to the ‘0’ position and 

the power switch turned off. 

10. 

Unplug the pasta cooker from the mains power when not in use. 

 

Specification 

 

 

 

 

 

 

 

 

 

Model 

Voltage 

Power 

Boiler  baskets 

Dimension/mm 

EPC4T 

380V/50Hz 

4000W 

4pcs 

200x155x160 

EPC6T 

380V/50Hz 

6000W 

6pcs 

600x580x410 

EPC4F 

380V/50Hz 

4000W 

4pcs 

620x430x850 

EPC6F 

380V/50Hz 

6000W 

6pcs 

600x620x850 

Reviews: