background image

 

E01 

The temperature of IGBT is over high or the IGBT is 
open/short circuit. 

E02 

The  temperature  under  glass  is  over  than  180

,or 

the temperature sensor is in open/short circuit. 

E03 

The supply voltage over or lower than normal. 

 
                                                                   
 
 
 

Before cleaning, please unplug to avoid electric shock! 

Just remove the pot and wipe the surface. If the ceramic surface become's yellow use 

oxalic acid or tooth paste to clean it. 

Do not place anything inflammable, acid or alkali near the cooker to avoid corrosion 

and short longevity. 

Do not immerse the cooker in water and do not use gasoline or benzene etc detergent 

to clean. You should use soft damp cloth to wipe it. 

Please do not rub the surface by the bottom of pots to avoid damage of the plate. 

Thoroughly clean the cooker before storing, cover it with plastic bag and keep it in dry 

place. 
 
 
 

Use the cooker in correct temperature and humidity. 

Do not touch the surface after using as it can be still hot. 

Please use pots and containers with smooth bottom, if not, the temperature will not be 

high enough and lead to out of order. Do not use those pots made up of aluminum, 
copper or nonmetal. 

With the sluggish conduction of heat, empty pots and containers will be destroyed or 

deformed even if the cooker has protecting function to deal with this situation. So please 
do not heat empty pots and containers. 

To get the best efficiency, please use the recommended pots else it may cause out of 

order or poor efficiency. 

It is normal that there will be difference for each cooker for the sluggish temperature 

checking and different boiling point in different areas. 

If the supply cord is damaged, it must be replaced by the manufacturer, its service 

agent or similarly qualified person in order to avoid a hazard. 

This cooker does not heat small objects put on the heating surface. But you had better 

not put metal, forks, knives, spoons or watches on it, which will be damaged after the 
cooker starts to work. 

Try not to collide the ceramic plate. If broken, please cut off the power immediately 

6.Cleanliness and maintenance 

7.Note 

Summary of Contents for CIC2000











Reviews: