Adexa CB-699, Instruction Manual

Page: 5 / 15

Models CB-699
Rated Voltage 120V Heat resistance of Jar -
-10
°
-105
°
Rated Frequency 50/60Hz Max currency 15A
Rated /Peak Power 1680W / 2200W
Jar capacity 2.0L
Max over-heat protection 125
°
VI.Operation Instructions
A. get ready to work
1. Plug on the Blender, get ready to use.
2.This machine is built-in a safety device, please place the Jar stably on the Blender
base, then can trigger the safety switch to enable machine to work.
3. Fill the food material into the Jar, do not exceed the MAX marking on the Jar.
4.Close the Lid plug and Lid on position.
5. Close the Noise cover, start working.
B. Blending Tips
➢
When pouring the food materials into the Jar, please be aware of the order. Please
put liquid type of food and soft food material 1stly, then put ice, then add solid
food materials.
➢
It is better to use slow speed to start then transit to high speed
Always press the Lids tightly at position before turning on the machine, you can
take off the Lid plug and fill in ingredients throught the hole on top of the Lid
during blending.
➢
When processing the hot drinks, please start with slow speed then transit to high
speed; when too much food materials inside the Jar, plase use Pulse funtion to
blend loose the materials, then resuem to regular blending..
➢
During blending process, if the food materials are been pushed toward the Jar
wall, it means rotation speed is too high, it should be reduced. On the other hand,
if the food materials are moving above the blade, it means the speed is too slow,
needs to be increased.
Take the Jar off the machine base ONLY after machine was turning off and blades
stop rotation completely.
➢
This blender is equipped the overload protective switch in order to protect the
motor in overload situations. Please wait until the motor has cooled off (can use
fan to blow the base cooled off), then turn on the machine to restart.