FR
FR
EN
FIELD TEST DEVICE - LoRaWAN US 902-928 - Mode d'emploi V1.0.0
19
Page
of 27
5. DEVICE CONFIGURATION
The device can be configured using the USB connector. This connection allows you to communicate with the device via the IoT Configurator or a
virtual com port and to transmit AT commands in order to modify the parameters of the device.
5.1. Connecting the device to a computer
Connect the Field Test Device (FTD) to the USB input of a computer. The FTD device has a Type B micro USB connector.
During connection, the device must be recognised by the computer as a Virtual Com Port (VCP) device.
Using Windows: Verification that the device has been recognized to be functioning properly can be obtained by consulting the device manager.
You should see the USB series device with a corresponding COM port number appear during connection.
If you are not able to see a device of this type, you must install the USB driver for this device, available to download from our website:
https://www.adeunis.com/en/downloads/
Select the file: DRIVER-stsw-stm32102_vcpdriver.zip.
