EN
sigfox MODBUS MASTER - Guide utilisateur / User guide version V1.0.1
47
Page
of 80
FR
1. PRODUCT PRESENTATION
IMPORTANT NOTE: The sigfox MODBUS MASTER can only be started with a magnet.
Description:
• The adeunis® sigfox MODBUS MASTER is a ready-to-use radio transmitter with a MODBUS interface
• This product meets the needs of users to communicate with one or several MODBUS slaves and transmit their information via a sigfox
network.
• The product use the Remote Terminal Unit (RTU) Modbus protocol to communicate with the slaves.
• The frame of the product can contain 5 registers maximum. These registers can be distributed between the monitored slaves (5 slaves
maximum) knowing that for each slave 5 registers can be configured.
• The product transmits the data from the slaves either periodically or in an event-related way based on high or low thresholds.
• The configuration of the transmitter is accessible by the user via a micro-USB port or remotely via the sigfox network, allowing in particular
a choice of modes of transmission, periodicity or triggering thresholds.
• The sigfox MODBUS MASTER is powered by an external power supply (not included).
• The product is able to provide and control the power supply for a slave.
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate,
Cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs
1.1. General description
105
90
27
50
105
90
27
50
2 holes for passing
collars through
Rail-DIN unlocking
lever
4 fastening holes
Cables outlet
packing gland
Casing base
Casing base detail
Antenna