FR
sigfox MODBUS MASTER - Guide utilisateur / User guide version V1.0.1
FR
4
Page
of 80
ENGLISH 41
PRODUCTS AND REGULATORY INFORMATION
42
1.
PRODUCT PRESENTATION
47
1.1. General description
47
1.2. Dimensions
48
1.3. Electronic board
48
1.4. Technical Specifications
49
1.4.1 General characteristics
49
1.4.2 Physical interface characteristics
49
2.
PRODUCT OPERATION
50
2.1. Global Operation
50
2.1.1 PARK mode
50
2.1.2 COMMAND mode
50
2.1.3 OPERATING mode 50
2.2. Application operation
51
2.2.1 Periodic transmission
51
2.2.2 Transmission on exceeding of the threshold
52
2.2.3 Transmission of a daily Keep Alive frame
53
2.2.4 TEST mode
54
2.3. Operation of the LEDs
54
3.
DEVICE
CONFIGURATION
55
3.1. Iot Configurator
55
3.2. Advanced mode
55
3.2.1 Connecting the device to a computer
55
3.2.2 Command mode
56
3.3. AT commands
57
3.4. Description of the registers
58
3.4.1 Function registers
58
3.4.2 Network registers
61
4.
DESCRIPTION OF THE FRAMES
61
4.1. Uplink frame
61
4.1.1 Fixed bytes
61
4.1.2 Frames of information on the product configuration
62
4.1.3 Frame of information on the network configuration
63
4.1.4 Keep Alive frame
63
4.1.5 Reply frame to a register VALUE request in a downlink frame
63
4.1.6 Periodic data frame
64
4.1.7 Alarm frame
65
4.1.8 Summary of the conditions of the transmission of the uplink frames
65
4.2. Downlink frames
66
4.2.1 Product configuration request frame
67
4.2.2 Network configuration request frame
67
4.2.3 Specific register VALUE request frame
67
4.2.4 Frame for updating the VALUE of specific registers
68
5. START-UP
69
5.1. Wires description
69
5.2. Link configuration
69
5.3. 2-wire RS485 example of wiring
70
5.4. RS232 example of wiring
70
5.5. Starting up the product using a magnet
71
5.6. Closing the case
72
6.
INSTALLATION AND USE
73
6.1. Correct positioning of the product
73
6.2. Types of fastenings
73
6.2.1 Tube or mast fastenings
73
6.2.2 Fixing with screws
74
6.2.3 DIN-Rail fixing
75
7.
DOCUMENT HISTORY
75
DEUTSCH VORSCHRIFTEN
76