EN
LoRaWAN COMFORT CO2 - Guide utilisateur / User guide version V1.1.1
67
Page
of 69
FR
2.12. Operation of the LEDs
Mode
Red LED State
Green LED state
Product in PARK mode
Off
Long push button (5 sec) in PARK mode
-
ON from detection of the event during almost
1 second
Product start (after detection of the push
button)
-
Rapid flashing:
6 cycles 100ms ON / 100ms OFF
COMMAND mode
Fixed*
JOIN process (LoRaWAN)
Flashing: 50ms ON / 1 s OFF
Flashing: 50ms ON / 1 s OFF
(after red LED)
JOIN process: JOIN ACCEPT
Flashing: 50ms ON / 50ms OFF (6x)
Flashing: 50ms ON /50ms OFF (6x)
(avant LED rouge)
Network quality test - running
10 to 20 seconds ON*
Network quality test - result
Test result is good = Off
Test result is medium = ON 10 seconds*
Test result is bad = ON 10 seconds
Test result is good = ON 10 seconds
Test result is medium = ON 10 seconds*
Test result is bad = Off
Sensor calibration - running
Green ON 100 ms, Orange* ON 100ms and Red ON 100ms then OFF 5 seconds
Sensor calibration - done
5 times: Green ON 100 ms, Orange* ON 100ms and Red ON 100ms then OFF 2 seconds
Short press-button (<500 ms) in
PRODUCTION mode (event detection)
ON during the push-button*
Long press-button (> 1s) in PRODUCTION
mode (manual calibration)
-
ON during the push-button*
Low battery level
Flashing: 500ms ON every 60s
-
Product faulty (return to factory)
Fixed ON
-
* The green and red LEDs ON simultaneously give a white/yellow rendering through the casing.
LEDs scenario for a sensor configured in Class A OTAA:
JOIN process :
LED blink successively
every seconds
JOIN ACCEPT :
LED blink successively
every 50 ms
Network test:
LEDs fixed during
10 to 30 seconds
Network test result:
During 10 sec,
Green = Good,
Orange = Medium,
and Red = Bad
CO3 sensor calibration:
The 3 leds green, orange,
red flash successively every 5
seconds during 10 minutes
10 sec
