EN
LoRaWAN COMFORT CO2 - Guide utilisateur / User guide version V1.1.1
56
Page
of 69
FR
Procedure to follow to program its registers according to the chosen mode:
Which mode do I want to use ?
Periodic
Periodic
+
Alarm
Alarm on
exceeding
threshold
What period do I want between each reading?
A reading every X
seconds
A reading every X
seconds
A reading every X
seconds
I divide the X value
by 2 and I indicate it
in the
S321 register
I divide the X value
by 2 and I indicate it
in the
S321 register
I divide the X value
by 2 and I indicate it
in the
S321 register
I save each reading
I indicate 1 in my S320
register
When will my frame be sent?
I want to scan regularly
for my alarm but I need
to save the information
every Y time
When do I save the information?
I indicate the Y value in
my S320 register
In alarm mode I do
not need to save the
information
I do not need to enter
a value in the S320
register
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (9 being
the maximum possible
in LoRaWAN)
I want to maximize
my frame to minimize
the number of
transmissions
I indicate the number
of readings that I want
in my frame in my
register S301 (9 being
the maximum possible
in LoRaWAN)
My frame is sent
when my threshold is
exceeded
I indicate 0 in my S301
register to disable the
periodic mode
I set my thresholds
S330 to S334 for
temperature, S340 to
S344 for humidity and
S350 to 354 for CO2
concentration
I set my thresholds
S330 to S334 for
temperature, S340 to
S344 for humidity and
S350 to 354 for CO2
concentration
