7-1
1
6
B=05
4 x 30
mm
Screw
ATTACH CROSSBARS
AND SHELF
TO
LEFT SIDE PANEL
•
Attach all crossbars and the shelf (parts 04, 05 & 09) to the Left side panel (part 03) by first aligning the dowels (part A) inserted
in step 1 with the pre-drilled dowel holes in the Left
-facing
side panel (part 03) as shown.
•
Once aligned, push all crossbars and the shelf (parts 04, 05 & 09) into the the Left
-facing
side panel (part 03) until flush.
•
Then secure each one using 5 of the part B screws, as shown.
•
The part B screw should be just tight. Do not force or over-tighten as this could cause damage to the panel, crossbars and/or shelf.
B
B
B
B
B
03
LEFT
-FACING
PANEL
04
04
05
09
A
A
A
A
A
B=05
4 x 30
mm
Screw
ATTACH RIGHT SIDE PANEL TO
CROSSBARS
AND SHELF
NOTE: Do not attempt to
complete this step with
the unit upright. It should
be
flat on its front side
on a hard
, clean
surface.
B
B
B
B
B
02
RIGHT
-FACING SIDE
PANEL
A
A
A
•
Attach all crossbars and the shelf (parts 04, 05 & 09) to the
Right
side panel (part 0
2
) by first aligning the dowels (part A) you
inserted in step 1 with the pre-drilled dowel holes in the
Right
side panel (part 0
2
) as shown.
•
Once aligned, push all crossbars and the shelf (parts 04, 05 & 09) into the the
Right
side panel (part 0
2
) until flush.
•
Then secure each one using 5 of the part B screws, as shown.
•
The part B screw should be just tight. Do not force or over-tighten as this could cause damage to the panel, crossbars and/or shelf.
5
03
A
09
05
A
A
A
A
A
04
04
A
A
LEFT PANEL
NOTE: UNIT IS
PICTURED LAYING
FLAT ON ITS
FRONT SIDE.
NOTICE:
7+(:5,77(1
,16758&7,216
CONTAINED
+(5(,1$5(
&23<5,*+7('
