adept technology Cobra s600, User Manual

Page: 35 / 152

Adept Cobra s600/s800 Robot User’s Guide, Rev H 35
Robot Installation
3
3.1 Transport and Storage
This equipment must be shipped and stored in a temperature-controlled environment,
within the range –25° C to +55° C. The recommended humidity range is 5 to 90 percent,
non-condensing. It should be shipped and stored in the Adept-supplied packaging, which
is designed to prevent damage from normal shock and vibration. You should protect the
package from excessive shock and vibration.
Use a forklift, pallet jack, or similar device to transport the packaged equipment (see
Figure 3-1
).
The robots must always be stored and shipped in an upright position in a clean, dry area
that is free from condensation. Do not lay the crate on its side or any other position: this
could damage the robot.
The s600 robot weighs 41 kg (90 lb) and the s800 weighs 43 kg (95 lb) with no options
installed.
Figure 3-1. Cobra s600/s800 Robot on a Transportation Pallet
Eyebolt for lifting robot
after robot has been
unbolted from the
transportation pallet.
Place forklift or pallet-jack here.