13
EN
BEFORE USE
Stirrer
•Lock the welded nut of the paddle with one mounting spanner and loosen the stirrer anticlockwise
with another mounting spanner gripping the welded nut.
•Loosen the welded nut anticlockwise and remove the stirrer from the paddle.
•Attach a new paddle/stirrer as required.
Speed dial
•Rotate the product speed dial to change the speed of operation.
Instant Mode
•Switch the product on by pressing the On/off switch.
•Switch the product off by releasing the On/off switch.
Continuous mode
•Switch the product on by pressing the On/off switch and hold it in position.
•Press the lock-on button and hold it in position to lock the On/off switch.
•Release the lock-on button and On/off switch to switch the product off.
OPERATION
•Ensure that the air vents are always unobstructed and clear. Clean them if necessary with a soft
brush. Blocked air vents may lead to overheating and damage the product.
•Switch the product off immediately if you are disturbed while working by other people entering
the working area.
•Always let the product come to complete stop before putting it down.
•Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and
have full control over the product.
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed!
•Plug in in the socket out-let of 220-240V~.
•Hold the product with hands on both handles and insert the stirrer into the material.
•Gently rotate speed dial to start operation at a low speed.
•Move the stirrer through the material until it is evenly and completely mixed.
•Switch off the product by releasing the on/off switch. Let the stirrer come to a complete
stop before lifting it out of the mixing material.
