- 12 -
STOP THE ENGINE
1. Set the speed throttle lever at the low speed position and allow the
engine to run at low speed for 2 or 3 minutes before stopping.
2. Turn the STOP SWITCH counter-
clockwise to the position “O” (OFF).
3. Close the fuel cock.
4. Pull the starter grip slowly and return the grip to its original position
when resistance is felt.
Notice!
The above operation is necessary to prevent outside moist air
from intruding into the combustion chamber.
Summary of Contents for TRE-85
