ADENDORFF TRE-85, Operation Manual

Page: 11 / 32

- 11 -
OPERATION
1. After the engine starts, set the speed throttle lever at the low speed
position and warm it up without load for a few minutes. Gradually move
the speed throttle lever toward the high speed position and set it at the
required engine speed.
Notice! Whenever high speed operation is not required, slow the
engine down (idle) by moving the speed throttle lever to save fuel and
extend engine life.
2. Through the handle guiding cause the machine to travel. The machine
has the high compaction performance when the metal sheet balances
on the surface. Never severity pressure or holding on the handle can
damage the machine. See down fig.
NOTICE!
a. Turn the engine switch to the OFF position when stop working.
b. Do not allow to the machine work on the severity harden surface.