User’s Manual
48
CAUTION: Write the password down and keep it in a safe place. Once the
password has been reset, the default will no longer work. If the password is
forgotten, the unit must be reset using the
Factory Reset Button
and all data
settings will be lost.
LAN Setup Screen
Figure 56 — LAN Setup screen.
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from
your network administrator.
Change the numbers by highlighting them and using the
Up
and
Down
arrow buttons to
increase or decrease the number.
The factory default LAN settings are:
IP Address:
192.168.1.129
Gateway:
192.168.1.254
Subnet Mask: 255.255.255.0
You can save your changes and return to the
Network Setup
screen by highlighting
OK
and
pressing the
button. Selecting
Cancel
exits the screen without saving the changes.
Summary of Contents for AHDR16
Page 1: ......
Page 3: ...User s Manual ii...
Page 83: ...User s Manual 72 Appendix E Map of Screens...
Page 91: ......
