Basic Programming
General Navigation for Programming Modes
advance to the next step press
return to the previous step press
exit programming mode press
Set Time of Day
Step 1:
Press and Hold
for 3 seconds
Step 2:
Set “Hour”
AM/PM toggles at 12
Step 3:
Set “Minutes”
Step 4:
End Programming
Installation Programming
Step 1:
Press and Hold
for 3 seconds
Step 2:
The display “-nA-” will appear indicating the
system is programmed for
FILTERING
if “-nA-” does not appear, press
to exit programming.
Refer to pg 9 for System Programming.
Step 3:
Day Override: Set to “28” days
if water usage does not activate a backwash based on demand, the system will override
the meter and backwash at 28 days
Step 4:
Set Time of Backwash (Hour)
Step 5:
Set Time of Backwash (Minute)
Step 6:
End Programming
-
N
a
-
CLOCK
CLOCK
NEXT
CLOCK
REGEN
REGEN
NEXT
or
or
or
or
or
CLOCK
and
NEXT
Page 8
AdEdge030413
