3
060100-Rev000-M70612
Your ADE Electronic Lifter Scale is a quality product and has been manufactured for use in
rehabilitation centres, nursing- and old-aged homes or any other medical precautional- or after care
clinic.
The scale is manufactured for precise weighing of patients not being able to be weighed
standing up on a common personal scale.
In order to achieve the best possible results kindly read and follow the Operating Manual in all respects.
Installation and use of scale
Check carton contents:
-
Lifter Scale, completely mounted
- Operating
Manual
Unwrapping and installation of scale at suitable patient lifter
- Carefully remove all packing material being used to prevent transport damages and store this
material for eventual necessary re-sending for warrantee or repair cases.
- Remove the suspension yoke of the patient lifter and replace this by using the upper
suspension eye of the scale to combine lifting arm and scale.
-
The suspension yoke of the lifter is not attached to the bottom suspension eye of the scale.
-
An essential part to secure utmost safety is the twisting joint of the patient lifter. The ADE lifter
scale can be used with all leading quality patient lifter systems once ADE has approved the
twisting joints used are granting utmost safety.
-
To grant 100% safety we recommend to use ONLY the ADE twisting joint which can
be purchased as accessory to the lifter scale.
Power supply of the scale
The scale is operated by 4 Mignon batteries (1,5V).
One set of batteries is included.
Connecting additional equipment
Conditions for connecting additional equipment are fulfilled via RS 232.
Use of the scale
Weighing
Press
:
-
key
to start the scale. After start up an automatic function test is done which ends in
switching into `0.00´ position in kg weighing mode. The scale is now ready for use.
To do this fix the carrying equipment of the patient lifter to the suspension eye of the scale and tare the
weight. Now place the patient in the carrying equipment and read the weight after stand still.
You may switch on the backlight of the display by pressing the
:
-
key
again.
To turn off the scale press and hold
:
-
key
for 3 seconds.
