ADE M500020 Series Operating Manual Download Page 6

 

M500020-210322-Rev009-UM-e 

 

Tips for handling the batteries 

The life of a battery depends essentially on the load, frequency of use, temperatures, settings and the acces-
sories being used. 

– 

New batteries or batteries that have been stored for long periods require a longer charging period. 

– 

Charge the batteries at room temperature. 

– 

Never expose the batteries to temperatures below -10°C (14°F) or above 45°C (113°F). 

– 

Rechargeable  batteries  lose  their  charging  capacity  over  the  time  and  require  a  longer  charging  period 
the older they are. If the battery performance drops considerably, then it is time to replace the battery. 

– 

New batteries are supplied in partial charged condition. Batteries achieve their full capacity after several 
complete charge and discharge cycles. 

– 

Do not throw old rechargeable batteries into the domestic waste. Ensure that the valid legal and municipal 
regulations of your country are being followed. 

– 

Never dispose of batteries in fire as they can leak or explode 

 

Quality features 

ADE  products  correspond  to  the  applicable  EC  Directives  and  European  standards  to  manufacture 
and  distribute  world-wide  medical  devices  as  per  the  latest  technical  standards  ensuring  a  long  life 
time and continuous reliability. 

 

This  symbol  stands  for  compliance  of  the  European  Directive  covering  medical 
devices and declares the conformity as per the Medical Device Law.. 

 

Approved  scales  classes  III  respecting  the  standards  of  the  European  guideline 
covering approved scales are carrying this sign. 

 

Scales  carrying  this  symbol  are  approved  and  accredited  within  the  European 
Community and fulfils first class demands for calibrated scales. 

 

Products carrying this symbol meet the requirements as per: 

  The valid EC Directive for non automatic scales  

in the latest version. 

M21 

Summary of Contents for M500020 Series

















Reviews: