050100-Rev001-M20610
4
-
The mains adapter is not waterproof. Therefore make sure NOT to use the scale where water
can penetrate.
-
In case the mains adapter became wet or show visible damages the scale can no longer be
operated by using this mains adapter. In this case please contact your local dealer or service
partner.
Weighing
To take the weight
- Press
key
ON
to start the scale. `8888´will appear on the display which is an automatic
function test and zero setting. When `0.0´appears you are in the kg weighing mode. In addition
display will show the symbol `
o
´ to confirm stability of the zero setting.
-
The scale may now be used.
-
Step on the platform and stand still.
-
After display is showing your weight and symbol `
o
´ appeared the most accurate result has
been reached.
-
To turn off the scale press key
OFF
for minimum 3 seconds. This is essential if scale is used
on batteries. Using the scale on mains it may remain permanently switched on or can be shut
off manually by pressing key.
Change unit function
You may select the weight unit between kg and lb mode. Coming from the factory the scale is
switched to kg mode. To change into lb mode press
UNIT/WEIGHT
key.
Caution
-
Please check weighing mode after switching to get proper result.
Set zero
You may set any displayed weighing result back to zero `0.0´by pressing the
ZERO
key. The
advantage is to weigh shoes or dress separately.
-
Place objects on the scale.
- Press
ZERO
key.
-
Unload the scale.
-
The weight displayed before is showing a negative value and will be deducted automatically
during the next weighing procedure.
-
The negative value will not be stored.
