3
050100-Rev001-M20610
Installation and use of scale
Your ADE scale is a quality product. In order to achieve best possible results please follow strictly the
instructions of this Operating Manual:
Check carton contents
-
Weighing platform incl. column connection
- Column
-
Display incl. connecting cable
-
Assembling material consisting of: Head plate with adhesive tape
-
Column cover plate
- Screws
- Mains
adapter
- Operating
Manual
Assembling:
Remove all packing material and store same for use in case of warrantee claim.
-
First pull the connecting cable being connected to the display through the head plate (Velcro
side up).
-
Lead the cable down the column (head plate still loose)
-
Place the column into the column connection
-
Use the plug connection and fix the cable using the cable holder
-
Mount column cover plate from underneath by using 3 of the screws and pull them tight.
-
Now fasten the head plate with 3 screws on the upper part of the column.
-
The display is finally connected to the head plate by using the Velcro.
Before weighing
Power supply of the scale: By mains adapter (12V 300 mA) and rechargeable batteries
-
The display is already equipped with rechargeable batteries.
-
To charge the power-pack for the first time please use the mains adapter.
-
Complete first charging needs 24 hrs.
-
Place the scale in its working area.
-
Make sure to place the scale on an even ground.
-
The scale is now ready for use.
Caution:
Please operate the scale only with the original ADE mains adapter that has been delivered.
-
Always fit the adapter to the scale
BEFORE
connecting to an electrical outlet
-
Disconnect from the electrical outlet
BEFORE
disconnecting the adapter from the scale.
