ADE M112600, Operating Manual

Page: 4 / 12

3 M112600-210511-Rev004-UM-e
Keys
ON / TARE
To switch the scale on/off and to zero it.
For taring a desired weight value.
UNIT To switch between the weight units (kg, lb).
MEM For storing and recalling measured values.
Positioning and commissioning of the scale
Insert batteries
Open the battery compartment underneath the scale and insert batteries 4x LR6 / AA 1.5V (not
included in delivery)
Make sure to insert batteries respecting the indicated polarity (+/-). Close the battery
compartment and control the safe latching.
Positioning of the scale
Place the scale on a level surface.
Make sure all four flexible feet embedded on the bottom side of the scale have direct contact
to the surface. Minor unevenness is levelled by the flexibility of the feet.
Make sure the scale is not bouncing but has a firm stand.
This is imperative to secure the safety of the baby and a necessary condition to achieve
a correct and reliable weight result.
Commissioning of the scale
The scale can be operated on either mains or batteries. Subject to proper insertment of
batteries you may switch on the scale immediately by pressing the ON / TARE key.
For use on mains the scale has to be connected to the mains adapter included.
The connecting plug is situated on the backside of the scale. Make sure to only use the
delivered mains adapter.
Before connection of mains adapter please check the voltage parameter imprinted on the
mains adapter corresponds to the local voltage. If this is not the case DO NOT connect the
adapter to the scale!
Connect the mains adapter to the local power supply.