ADE LW300 Series Operating Manual Download Page 14

14 

LW300_LW300T-200520-Rev005-UM-en 

 

Error messages 

Failure 

Cause 

Measure 

ERR 4 

Current weight exceeds the zero 
range of the scale 

Unload the weighing surface and try 
again. 
If necessary, restart the scale. 

ERR 5 

Keypad fault 

Please contact your service partner. 

ERR 6 

Load cell is defective or not 
connected. 

Please contact your service partner. 

Err 9 

Weighing result unstable due to 
draughts, air movement or 
vibrations. 

Avoid draughts, air movement and 
vibrations. 

Load cell is defective. 

Please contact your service partner. 

Err 19 

Current weight exceeds the 
permissible range for automatic 
zeroing when switched on. 

Unload the weighing surface and 
then restart the scale if necessary. 

--oL-- 

Zero range or weighing capacity 
exceeded 

Unload the scale.  

-- UL -- 

Underload (-20d) 

Switch the scale off and on again. 

Storage and Transport Conditions 

Keep all original packaging materials for a possible return of the scale to avoid damage in 
transit. Disconnect all cables before transport and switch off the scale to avoid damage. 

Disposal 

 

Waste electrical equipment do not belong in household waste. Devices 
with this marking may not be disposed of as residual waste, but must 
be recycled. 

 

Remove (if possible) all batteries and rechargeable batteries from the 
devices and send them to the battery disposal. 

 

Make sure that only depleted batteries or batteries with insulated poles 
are disposed of so that there is no short circuit! 

Warranty 

ADE will repair or replace this product if evidence is provided that it has failed within 1 year from 
the date of sale (proof of purchase is required) due to lack of workmanship or defective material. 
All moving parts, such as batteries, cables, etc. are excluded. 

The use of accessories other than those approved by ADE, especially batteries, will void the 
warranty. 

This warranty does not cover external normal wear and tear or damage caused by accident or 
misuse. The warranty will not apply for devices that have been opened by unauthorised persons. 
The statutory rights of the customer are not affected by this agreement in any way. 

The dealer from whom the scale was purchased is responsible for complaints, customer service 
and spare parts. 

Summary of Contents for LW300 Series





















Reviews: