10
LW300_LW300T-200520-Rev005-UM-en
Zero-Setting
Press the
key when the scale shows a weight, even though the weighing surface is
completely empty. The display “Weight” of the scale shows 0.000 again.
Price-computing
Place the sample on the weighing surface. The display "Weight" shows the weighing result. To
determine the price, use the numeric keys
to
or the
key to enter the price per
kilogram, which is shown in the display “Price”. The scale now automatically determines the total
price, which is shown in the display "Total".
You can use the
key to delete incorrect entries and then immediately enter the correct price.
After removing the sample, the basic price display automatically returns to zero.
Taring
With this function, the user can weigh objects together with other items (such as container, film
or paper towel), without the weight of those items affecting the weighing result.
Turn on the scale.
Place the objects to be tared on the platform (e.g. container, foil or paper towel) and press the
key. On "Weight" display the scale shows 0.000. At the same time the arrow (
▼
) above the
NET symbol indicates the net weight mode. As soon as you place the product to be weighed in
the container, only the net weight of the product to be weighed is displayed.
Carry out as many weighing operations as required. As long as the tared container remains on
the weighing platform, only the net weighing results and the prices determined for them will be
displayed.
If no further input is made, the tare weight is shown as a negative value in the "Weight" display
when the tared container and the weighed goods are removed. To delete the tare weight in this
case, press the
key again when the weighing platform is unloaded.
If a weighing operation (with or without price determination) is carried out, the values are
automatically deleted and the displays for the tare weight and the basic price show zero after
the product to be weighed and the tare weight are removed.
Saving and retrieving article prices (PLU)
The scale allows you to save article prices for up to 14 articles (4 direct PLU and 10 indirect
PLU). To store this article data, proceed as described below.
Saving direct PLU
To store basic prices in one of the four direct PLUs, enter the desired basic price. Then press
and hold one of the four direct PLU buttons
to
for approximately 2 seconds. The
displays "Weight" and "Base Price" will show SAVE POS together. The basic price is now stored
with the corresponding direct PLU.
Retrieving direct PLU
To recall stored direct PLU, press the desired direct PLU button
to
. The display shows
the stored basic price. Continue the price determination by placing the sample on the weighing
platform.
