Hanseat-210617-Rev008-UM-en
8
7. TRAINING
During installation of the slicing machine, the adult operator of the machine must be adequately
trained in the areas of use - cleaning - maintenance - sharpening of the cutting blade, taking
particular account of the dangers arising from improper use.
The training must be carried out by the person entrusted with the installation of the machine and
who has sufficient knowledge of the EC standards in machine engineering.
8. CLEANING AND MAINTENANCE
- Cleaning of the slicing machine is exclusively reserved for persons trained for this purpose.
- Pull the plug from the socket. In this case, switching off the machine using the red stop button
must never be considered sufficient to switch off the machine from the mains.
- The machine must be moved by two persons, using the four feet as a guide.
- The cutting blade must be replaced as soon as the distance between the cutting blade guard and
the cutting blade is a maximum of 6 mm.
- Pay attention to the particularly sharp cutting blade edge.
- The mains cable must only be replaced by authorised and trained persons.
- It is strictly prohibited to clean the slicing machine with products that can damage the health of the
operator or the customer. Use only products with an acidity of PH 7-8 when cleaning.
9. STORAGE AND TRANSPORT
Keep all original parts and pieces for an eventual sending back of the scale in order to avoid any
possible damage during transport which automatically leads to no warranty.
10. DISPOSAL
Waste electrical equipment do not belong in household waste. Devices
with this marking may not be disposed of as residual waste, but must be
recycled.
11. WARRANTY
ADE will repair or replace this product if it has failed within 2 years from the date of purchase (proof
of purchase is required) due to lack of workmanship or defective material.
All moving parts, such as blades, grinders, food carriages, etc., are excluded from this warranty.
Warranty does not apply to normal appearance of usage or sign of wear or any damages caused
by accidents or misuse.
The warranty will not apply for devices that have been opened by unauthorised persons.
This warranty agreement does not affect the customer's legal rights in any manner.
The dealer from whom you purchased the machine is responsible for complaints.
Summary of Contents for HANSEAT 250 Series
