ADE GW400 Series Operating Manual Download Page 5

GW400-210408-Rev004-UM-en 

 

5.  Scope of delivery 

Check the  delivery  for  completeness  as soon  as  you receive  the  scale. Carefully  unpack  the 
scale and accessories and remove all packaging materials. 

The following items are included in the delivery: 

-  Compact scale 

-  Power supply 

-  Operating manual 

-  Declaration of conformity 

-  Optional: 6 V 4 Ah rechargeable battery (inserted in the scale) 

 

 

For calibrated scales: Check the identity of the scale serial numbers and the 
declaration of conformity. This is a mandatory requirement to use the scale in 
legal metrology! 

6.  Getting started with the scale 

1.  Carefully unpack the scale and accessories and remove all packaging materials. 

2.  Remove the transportation lock, if any, at the bottom of the scale. The transportation lock 

is provided with the label shown below: 

 

 

 

 

If  you  do  not  remove  the  transportation  lock,  your  scale  can  show 
incorrect weighing results! 

3.  Place the scale on a level, stable surface. Do not place the scale on a shaky or vibrating 

table as this will cause distortion of measurement results. 

4.  Connect one end of the power supply to the power connector on the bottom of the scale 

and the other end to the local power supply. 

 

In this case, before connecting the supplied mains adapter to the scale, 
make sure that the voltage on the nameplate matches the local power 
supply. 

 

After the warm-up time (15 minutes), the scale is ready for use. 

The  warm-up  time  applies  to  every  disconnection  from  the  mains 
(except battery mode). 

5.  Align the scale using the support feet. Make sure that the air bubble of the spirit level is 

centred in the black frame. 

 

Check the horizontal position of the scale 
after every change of location! 

 

6.  Switch  on  the  scale.  When  switching  on  the  scale,  the  weighing  platform  must  be 

unloaded. The scale runs through a test programme and acknowledges the end of the 
switch-on routine with a sound signal. 

 

If  the  weighing  platform  is  loaded  during  the  switch-on  process,  the 
scale  is  not  properly  ready  for  operation.  Switch  off  the  scale  and 
repeat the switch-on process. 

Transport 
Transport 

Transports 

Wägen 

Weighing 

Pèsent 

Transportsicherung 
Transportation lock 

Séurités de transport 

Summary of Contents for GW400 Series

















Reviews: