Safety
7
DiagonalSN-201123-Rev008-UM-en
Do not modify the machine or power cord. Only have repairs carried out by
a specialist workshop, as improperly repaired machines endanger the operator.
Do not use an extension cable.
WARNING OF RISK OF INJURY
The blade is very sharp. It is often not possible to tell whether the blade is rotating or
standing still. Thus, never touch the blade with your fingers or other body parts.
Always wear suitable protective gloves that protect against cuts during cleaning or
maintenance works.
Pull back long hair and secure it or cover it under a cap while working. Avoid loose or
hanging clothes such as scarves, ties, etc.
Lay the power cord so that it does not create a tripping hazard.
BEWARE OF MATERIAL DAMAGE
Never place the machine on or near hot surfaces (e.g. hot plates, etc.).
Avoid contact of the power cord with hot objects.
Never expose the machine to a high temperature (heating, etc.) or adverse weather
conditions (rain, etc.).
Place the machine on a robust, smooth, and easy-to-clean work surface. When
processing foods, occasional splashes are unavoidable. Observe the notes in chapter
"Notes on Installation Site".
Use only original accessories and spare parts.
The machine and its parts must not be cleaned in the dishwasher.
SAFETY DEVICES ON THE MACHINE
All safety devices are permanently installed on or in the machine and must not be
removed. Unauthorised changes to the machine will render it a dangerous device.
In such cases, the manufacturer cannot be held liable for any accidents or injuries.
The machine is equipped with a circuit breaker that is triggered in the event of a
voltage drop. After a power failure, the machine must be switched on again in order
to continue working with it.
The blade is protected (except for the area where the cutting process takes place) by
a rigidly attached cover.
The food carriage can only be removed when the feed plate covers the blade and the
slice thickness adjustment knob has been turned to “0” (zero) or to the stop beyond it.
If the food carriage has been removed or detached, the slice thickness adjustment
knob cannot be adjusted. The feed plate remains closed.
Aufschnittmaschine Serie Diagonal ENGLISCH SN1_SN2_SN3 11_2020.indb 7
Aufschnittmaschine Serie Diagonal ENGLISCH SN1_SN2_SN3 11_2020.indb 7
07.12.2020 12:24:36
07.12.2020 12:24:36