Start-up
13
DiagonalSN-201123-Rev008-UM-en
INSTALLING THE MACHINE
WARNING: Risk of injury!
−
Lay the power cord so that it does not create a tripping hazard.
1. Before plugging the power cord, check whether ...
−
... the mains voltage corresponds to the values provided on the name plate.
−
... the existing power supply is equipped with a suitable circuit breaker.
2. Plug the machine's power plug directly into the mains outlet. Do not use an extension
cable.
3. Switch on the machine and check the direction of rotation of the blade: When looking
at the machine from the side of the blade cover plate, the cutting blade must rotate
counter-clockwise.
The polarity of the machines is according to DIN. If the direction of rotation of
the three-phase slicer is not correct, two of the three phases of the plug must
be reversed. This work may only be carried out by a qualified electrician.
4. Switch the machine off.
CONDUCTING AN ACCEPTANCE INSPECTION
The following points must be checked before the machine is put into normal operation:
Check whether all components of the slicer have been assembled correctly.
Check whether the handwheel for fastening the blade cover plate is firmly tightened.
Press the operating buttons and check whether the machine can actually be switched
on and off.
Check whether the operating light works when it is switched on.
Check the sliding movement of the food holder and the leftover holder.
Check that the slice thickness adjustment knob is working properly.
CLEANING BEFORE THE FIRST USE
−
Proceed as described in the chapter “Cleaning”.
Aufschnittmaschine Serie Diagonal ENGLISCH SN1_SN2_SN3 11_2020.indb 13
Aufschnittmaschine Serie Diagonal ENGLISCH SN1_SN2_SN3 11_2020.indb 13
07.12.2020 12:24:37
07.12.2020 12:24:37