Captiv8-256
Captiv8 Engineering Manual Eng00 Issue 1a 03/06/04
15
To alter the selection, press the relevant A B C D keys again.
Press the Yes key to accept the selection.
Setting areas will be displayed.
SETTING
ALL AREAS
Captiv8-256 will now set the selected areas.
b) Flexi-Set
When the system is already set and it is required to unset it…
Key in the PIN code or present the tag.
NOVAR PLC
TIME:
All areas for which the tag or PIN is valid will be Unset. Any areas set for which
the code is not valid will remain set. E.g. if A and B are set…
If an 'A' tag is presented, only area A will be unset.
If an 'A B' tag is presented, both A & B will be unset.
An 'A B C' tag will unset A & B, leaving C unset.
If there are no areas set for which the code is valid, the system will set as
described in chapter 5 More Advanced Functions on page 16.
