Engineering Manual
10
Captiv8 Engineering Manual Eng
00 Issue 1a 03/06/04
2 Using the Keypad with PIN
Code or Tag
a) Security
Checks
If a warning tone sounds when the PIN code is keyed in or the tag is presented,
a message will show the nature of the problem.
The tone will cease after about 10 seconds.
Press the NO key.
The system will remain unset, so that the problem can be resolved.
For example, a door may have been left open. If this is the case, close the door.
With the problem corrected, repeat the setting procedure.
i) Faults When Switching On
If the exit tone continues to sound an interrupted tone... "beep - beep - beep - "
after the setting procedure has been completed, there is probably a protected
door left open on the exit route.
Return to the keypad and note the message on the display. E.g.
EXIT VIA HALLWAY
Stop the setting procedure by entering the PIN code, or offering up the tag.
Close the open door and repeat the setting procedure.
