Body analysis
25
Body Analyser Scales BA 1702 | BA 1703
English
2. Press and hold SET for a few seconds.
The display shows
and a memory cell number (1-10) blinking.
3. Using the or the button, select the desired memory cell.
4. Press SET.
Using the or the button, choose your sex: for male, or for female.
5. Press SET.
On the display, the preset value for height (e.g. “165” for cm) will flash.
6. Using the or the button, enter your height.
7. Press SET.
On the display, the preset value for age (preset: 25) will flash.
8. Using the or the button, enter your age.
9. Finally, press SET. You have thus entered the required data.
The display shows “0.0” and you can have your body analysis done.
If you do nothing else, the scales will automatically switch off after a few seconds.
If you hold down the or the button, the forward and backward
flow of the displayed data will occur more quickly.
Entered data can only be overwritten by making a new entry.
If the time interval between the two keystrokes is more than
20 seconds, the scale will switch off and you should repeat the
procedure.
Body analysis
Body analysis is only possible if your data has been entered (see
previous chapter).
See the chapter “Weighing Tips”.
1. Press SET to switch on the scale.
2. Using the or the button, select the memory cell in which you have recorded
your personal body data.
The data is briefly displayed, then “0.0” and the selected unit of measurement, e.g.
“kg”.
3. Position yourself barefoot on the scales. Remain standing still and do not hold on to
anything.
−
In doing so, ensure each foot is placed on a sensor.
−
There must be no contact between your feet, your legs, your calves, or your
thighs. Otherwise, the measurement will be imprecise.
Koerperanalysewaage 170x.indb 25
19.01.2018 13:41:54
