AP-IP230 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
140
Management Mode Command
T
hese are the types of commands that the administrator, whoever logged in the system, can use. To
get into configuration of this system mode, the user must be logged in as an administrator. In this
mode, the commands can be same as General User mode such as ‘show’, but more information can be
shown depending on the option.
The prompt of Management Mode can be indicates as ‘IP230#’.
[Table 5-2] Manager Mode Command
Command
Description
auto-upgrade
Configure to upgrade the image by using Http
clear
Reset the interface counter, statistics
clock
Set the present time, date, year
configure
Move to configuration mode
copy
Copy running config to startup conifg
debug
Debug the overall system
disable
Mover to General User Mode
disconnect
Close VTY connection
dnsquery
Test DNS Query
dnsrv
Test DNS SRV Record
end
Move to Management Mode
erase
Delete config file
exit
Move to the last mode
fsh
Get into File Shell
help
Indicate APOS help
no
Delete the present setup
nsupdate
Transmit the updated information to Name Server
ntpdate
Bring the time from ntp server
ping
Test network connection
quit
Move to the last mode
reboot
Reboot the system
show
Show the status of the system operation and the status of
configuration
terminal
Set the number of lines to be terminated at once
tftp
Transmit a file to tftp server
