AP-IP230 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
138
APOS Commands
NOTE
All the product lines of AddPac Technology are imbedded with APOS AddPac
Operating System). Therefore, all the basic settings of CLI (Command Line
Interface) are same.
The commands are used for the following types of modes:
User Mode: placing limitations on the system or providing an access for the data communication
Management Mode: checking the status of the system configuration or the debugging functions
of the system
Configuration Mode: changing the settings or creating new settings
•
You do not have to enter the entire command. Entering partial command is acceptable as to enter
just ‘sh’ or ‘sho’ and it is recognized as ‘show’ automatically.
•
If you made an error of entering the system commands, on-line help function provides the list all
the possible commands.
•
More function provides the additional screen to display all the remaining messages which are
missed out from one screen.
•
All the possible commands and their descriptions are executed in that particular mode by providing
Help and ‘?’ functions.
History provides a list commands which have been used previously. By using the number of the
prompt, you can enter the commands easily when you need to reenter them.
•
The structure of the system commands are divided into 3 types of modes and the commands used
are different to each other. The commands used for the each mode is described in the followings.
