www.addonics.com
Phone:
408-573-8580
Fax:
408-573-8588
Email:
http://www.addonics.com/sales/query/
CONTACT US
Cable Connections for DVR Optical Drive:
1.
Plug-in the SATA cable into a SATA port.
2.
Connect the 4-pin Molex power connector to a power supply.
Cable Connections for Multi-media bay:
1.
A SATA power & data Y-cable is provided with the multi-media bay. Connect
this cable to the SATA connection at the back of the bay.
2.
The SATA power & data Y-cable has a third connector. Attached this
connector to the power and drive activity LED connector as labeled above.
If this connector is not connected, the power & drive activity LEDs located on
the front of the multi-media bay will not function.
Drive Door Swings Open to Accommodate a 3.5” SATA Drive
Power LED
Drive Activity LED
Reserved Connector
Power and Drive Activity LED Connector
SATA Connection
