T E C H N O L O G I E S
User Guide
SATA - IDE Converter
(ADSAIDE)
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v4.1.11
Master, Slave & Cable
Select Jumpers
SATA Power and Data Connector
40-Pin IDE Connector
Pin 1 Marker
4-Pin Floppy Power Connector
Front View
Back View
Jumper Settings
Master Slave Cable Select
Note:
To set the SATA hard drive as a Master
Device when connected to an IDE channel,
you need to short the top pins located on
the converter by placing a jumper. As a
Slave Device short the middle pins.
