ADDON NHP5010 User Manual Download Page 87

Page: 87 / 126

NHP5010 User Manual

The following table describes parameters in this page:

Field

Description

Enabled

Enable or disable RIP.

Interface

Display the WAN connection name.

Version

You can select RIPV

, RIPV

Both

indicates that it

is compatible with RIPV1 and RIPV2.

Status

Display whether the specified RIP is valid or not.

After setting the parameters, click

Apply

to save the settings.

5.3.4.6

UPnP

By using the Universal Plug and Play (UPnP) protocol, a host on the LAN side can

require the router to realize the conversion of specific port, so that an external host

can access resources on the internal host when necessary. For example, if MSN

Messenger is installed on Windows ME and Windows XP operating systems,

UPnP can be used for audio and video conversations. In this way, functions

restricted by NAT can work properly.

Choose

Advanced Network

UPnP

on the left pane or click

UPnP

in the

ADVANCED NETWORK

page to display the following page.

In this page, you can enable the UPnP function and select a WAN connection.

After setting the parameters, click

Apply

to save the settings.

Summary of Contents for NHP5010































































































































Search results

Summary of Contents for NHP5010

Reviews:

ADDON NHP5010, User Manual, Page: 87 / 126

Search results

Summary of Contents for NHP5010

Reviews: