NHP5010 User Manual
51
Caution:
If you want to use WPS, you must select the WPA-PSK, WPA2-PSK or
WPA/WPA2-PSK mode and the SSID must be broadcasted.
WPS modes contain PBC mode and PIN mode.
PBC Mode
Click the
PBC
button in the WPS page or press the
WPS
button on the PLC
wireless router to start WPS connection.
Press the
WPS
button on the network card or click the
PBC
button in the
configuration utility page of network card within two minutes to start WPS
connection. After WPS connection is established, the following page appears. The
client can now visit the LAN.
PIN Mode
Enter the PIN of the network card in the WPS page (refer to the client of the
network card), and then click
PIN
to start WPS connection. The following page
appears:
