Launch the PC2TV application by double-clicking the PC2TV icon on your
Windows’ desktop. Typically, the EV-2100 will connect automatically
unless there are additional receivers on the wired LAN or within wireless range.
If this happens, select the EV-2100 by its ID as shown in the previous step.
4
In about 30-60 seconds, the EV-2100 will be fully initialized,
and the following image will appear on your TV.
3
This validates the connection between the EV-2100 and the TV
or projector. Next, you can begin the PC2TV software installation onto
your computer by inserting the CD into your PC’s CD-ROM drive.
Follow all onscreen instructions and prompts.
5
Notes:
•
If you require wireless Internet access through a wireless router
or access point with security (WEP, WPA, WPA-PSK/TKIP)
while connected to the EV-2100, you may be asked to provide
the Wireless Key. Write down your wireless settings below for
future reference.
Wireless key (if applicable)
Network Authentication
Encryption
Open / Shared
WEP
WPA
TKIP
WPA-PSK
AES
For Internet access
using RJ45 wired Ethernet connection, please refer to the User’s Manual on the CD.
•
PC2TV is a CPU-intensive application.
To maximize audio/video
performance and quality, close all unnecessary programs. Confirm
that your notebook or laptop’s power adapter is fully plugged in
to ensure full CPU speed.
•
PC2TV requires control over your PC’s networking subsystem
therefore the user must have administrative privileges.
PC2TV is a trademark of Quartics, Inc. Windows is a registered trademark and Vista is a trademark
of Microsoft Corporation in the United States and other countries. Other brand and product names
may be trademarks or registered trademarks of their respective holders.
