l
If your system does not provide a 2.5-inch drive bay(s), you will need
to mount the SSD in a 2.5-inch to 3.5-inch adapter bracket (3.5-inch
adapter bracket included with select models).
l
Install the SSD into an available drive bay.
l
Connect one end of both the SATA* data cable and power cable to
the SATA connectors on your motherboard and the remaining ends to
your SSD.
l
Reinstall the outer panel and reconnect the power cable to your PC.
l
Power on your system to verify a successful installation.
Note: If the SSD will be your primary boot drive, please refer to your
operating system’s user manual for further OS installation instructions. If
this SSD will be used as a secondary drive, formatting the drive is
required before use.
*SATA 6Gbit/s is backwards compatible with SATA 3Gbit/s. However,
connecting a SATA 6Gbit/s device into a SATA 3Gbit/s connection will
result in reduced performance.
6
SATA III 6Gb/s
SSD
User’s Manual
INTRODUCTION
REQUIRED TOOLS
& PREPARE
DESKTOP INSTALL
LAPTOP INSTALL
FORMATTING THE
SSD IN WINDOWS
CAPACITY
CALCULATION