Packaged Dedicated
Outdoor Air Unit
DANGER
ELECTRICAL SHOCK HAZARD
Disconnect electric before service.
More than one disconnect switch
may be required to disconnect
electric from equipment.
Equipment must always be
properly grounded.
SEVERE INJURY HAZARD
Do not enter equipment while in
operation. Equipment may start
automatically. Do not operate with
access doors open. Installation,
operation, and maintenance
must be performed by a trained
technician only.
BURN HAZARD
Allow equipment to cool before
service. Internal components of
equipment may still be hot after
operation.
WARNING
FALLING HAZARD
Use proper safety equipment and
practices to avoid falling. Do not
use any part of the equipment as
a support.
Failure to follow these instructions can result in
death, injury, or property damage.
EXPLOSION HAZARD
System contains R-410A
refrigerant. Operating pressures
may exceed limits of R-22 service
equipment. Use proper refrigerant
handling practices, tools, and
equipment. Failure to follow these
instructions can result in death,
injury, or property damage.
Technician Name:
Start-Up Date:
Part Number:
ADFMPRST
Rev.: 19 June 2020DS
*ADFMPRST*
Field start-up should be performed by a qualified technician.
The technician is responsible for assuring that all of the
items on the unit start-up checklist are properly installed
and operating. Upon completion, a copy of the form should
be returned [email protected].
Installation Code and Quarterly Inspections:
All installation and service of Addison equipment must be
performed by a contractor qualified in the installation and
service of equipment sold and supplied by Addison and
conform to all requirements set forth in the Addison manuals
and all applicable governmental authorities pertaining to the
installation, service, operation and labeling of the equipment.
To help facilitate optimum performance and safety,
Addison recommends that a qualified contractor conduct,
at a minimum, quarterly inspections of your Addison
equipment and perform service where necessary, using only
replacement parts sold and supplied by Addison.
Further Information:
Applications, engineering and detailed guidance on systems
design, installation and equipment performance is available
through Addison representatives. Please contact us for
any further information you may require, including the
Installation, Operation and Service Manual.
This product is not for residential use. This document is
intended to assist licensed professionals in the exercise of
their professional judgment.
7050 Overland Road
Orlando, FL 32810
Tel.: 407-292-4400 ∙ Fax: 407-290-1329
www.addison-hvac.com
DEDICATED OUTDOOR AIR SPECIALISTS
START-UP FORM:
PR Series
