APCI-7xxx Software
♦
Click on the parameter(s) you want to set and open the scroll
function(s).
♦
Select a new value. Activate it with a click.
♦
Repeat the operation for each parameter to be modified.
♦
Once the wished configuration is set, click on "Set".
♦
. Save the configuration with "Save".
You can test if the registration is "OK". This test controls if the registration
is right and if the board is present. If the test has been successfully
completed you can quit the ADDIREG program.
The board is initialised with the set parameters and can now be operated. In
case the registration data is to be modified, it is necessary to boot your PC
again. A message asks you to do so. When it is not necessary you can quit
the ADDIREG program and directly begin with your application.
Registration test
Under "Test registration" you can test if the registration is "OK".
This test controls if the registration is right and if the board is present. If the
test has been successfully completed you can quit the ADDIREG program.
The board is initialised with the set parameters and can now be operated.
In case the registration data is to be modified, it is necessary to boot your
PC again. A message asks you to do so. When it is not necessary you can
quit the ADDIREG program and directly begin with your application.
29
Summary of Contents for ADDICOM APCI-7300
Page 3: ......
Page 4: ......
Page 5: ......
Page 15: ...APCI 7xxx Handling of the board 3 HANDLING OF THE BOARD Fig 3 1 Correct handling 13 ...