Addi-Data ADDIALOG APCI-3504 Technical Description Download

Page: 3 / 33

WARNUNG

In case of wrong uses and if the board is not used for

the purpose it is intended:

♦

people may be injured,

♦

the board, PC and peripheral may be destroyed,

♦

the environment may be polluted

♦

Protect yourself, the others and the environment!

♦

Read carefully the safety precautions (yellow leaflet).

If this leaflet is not with the documentation, please contact us
and ask for it.

♦

Observe the instructions of the manual.

Make sure that you do not forget or skip any step. We are not
liable for damages resulting from a wrong use of the board.

♦

Used symbols

IMPORTANT!

designates hints and other useful information.

WARNING!

It designates a possibly dangerous situation.
If the instructions are ignored the board, PC and/or
peripheral may be destroyed.

Summary of Contents for ADDIALOG APCI-3504


































Search results

Summary of Contents for ADDIALOG APCI-3504

Reviews:

Related manuals for ADDIALOG APCI-3504

Brands by name

Popular brands

Addi-Data ADDIALOG APCI-3504, Technical Description

Search results

Summary of Contents for ADDIALOG APCI-3504

Reviews:

Related manuals for ADDIALOG APCI-3504

Brands by name

Popular brands