5
CONTENTS
INTR
ODUCTION
INST
ALLA
TION
OPERA
TION
FUR
THER
INFORMA
TION
Installation
CONNECTIONS
Installation of the X-DVIPRO-DL modules is straightforward and requires minimal
configuration in most cases.
•
Connections at the local module
•
Connections at the remote module
Note: After all connections have been made, power up the display screen and the remote
module first. Then power up the local module and finally switch on the computer. This will allow
each item to correctly discover, in order, the one immediately downstream.
Mounting the modules – desk or rack
The X-DVIPRO-DL modules can be situated on a desk or alternatively, for larger
installations, mounted within an optional rack mount chassis.
Desk mount
Apply the supplied self-adhesive rubber feet to
the underside of the module.
Rack mount
1 Place the rack securing plate (available as a separate kit) onto the front of the module
and secure it with the two countersunk screws.
2 Orient the X-DVIPRO-DL module on its side so that its labeled face is the correct
way up.
3 Slide the module into the required rack position. The rectangular cut-out in the front
upper lip of the rack allows the two screws on the module’s upper edge to slide
through.
4
The rack mount chassis has a series of holes in its floor that are
spaced to accommodate the two screws on the module’s
lower edge. Ensure that the screws correctly locate
into the two holes of the chosen slot. The rack
securing plate on the module should now be
flush with the front of the rack mount
chassis.
5 Use the third (pan-head)
screw, in the top hole
of the rack securing
plate to fasten the
module to the rack.
HT