Page | 15
ePowerSwitch 8XS
6.3.5. Setting the restart delays
This command enables to set the Restart Delay individually for each Power Outlet. The Delay value can
be between 1 and 255 seconds (4 min 15 sec).
Command to be sent to the ePowerSwitch 8XS:
TRxy=z[CR]
Reply from the ePowerSwitch 8XS:
TRxy=z[CR]
Explanations:
Parameter Value
Function/Remark
x
address of the ePowerSwitch
1 to 16 specifies the address of the ePowerSwitch 8XS
y
number of the Power Outlet
1 to 8
specifies the number of the Power Outlet
z
timer value
1 to 255 set the Restart Delay (in sec)
Examples:
TR31=17 Set Restart Delay of the Power Outlet #1 of ePowerSwitch #3 to 17 sec
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].
6.3.6. Reading out of the restart delays
This command enables to read out the restart delay individually for each power outlet.
Command to be sent to the ePowerSwitch 8XS:
TRxy[CR]
Reply from the ePowerSwitch 8XS:
TRxy=z[CR]
Explanations:
Parameter Value
Function/Remark
x
address of the ePowerSwitch
1 to 16 specifies the address of the ePowerSwitch 8XS
y
number of the Power Outlet
1 to 8
specifies the number of the Power Outlet
z
timer value
1 to 255 shows the Restart Delay (in sec)
The ePowerSwitch 8XS accepts lower case and upper case commands.
The ePowerSwitch 8XS sends its reply only after having received a valid command terminated by
the character [CR].
Summary of Contents for ePowerSwitch 8XS
Page 1: ...ePowerSwitch 8XS User guide Version 02 2011 www neol com...
Page 2: ......
