AdderView MP
Installation and Use
Page 25
Like the code files, the first two digits represent the product type (e.g. MP4 is
AdderView MP). The next three digits represent the version number (e.g. 129 equals
firmware version 1.29). The last three digits are the model number (e.g. SP is the
AdderView MP model SP).
To upgrade the AdderView MP, check that the DAT file designation matches the
model that you have. In other words, if you have an AdderView MP model SP and
you want to upgrade to version 1.30 then the DAT file that you need would be
named MP130SP.DAT. Also check that all the required files are loaded into the
same directory on your computer. From that directory run the upgrade file using the
following command line.
AVMP
{Dat_file_name}.
DAT
Where
{Dat_file_name}
is the name of the required DAT file
For example, if the name of the required DAT file is MP129SP.DAT then use the
following command line:
AVMP MP129SP.DAT
For you convenience the upgrade files will include a batch file that contains the
command shown above. To run the upgrade using the batch file, type the name of
the batch file e.g.
MP129SP
Follow the instructions given on the screen to perform the upgrade. When the
upgrade is complete the program will confirm that the upgrade has been successful
and then quit.
During the upgrade the display will show an upper case U and the dot will flash to
show that the upgrade is in progress.
