ADDER AdderLink X-DVI Manual Download Page 13



























Warranty

Adder Technology Ltd warrants that this product shall be free from defects in 
workmanship and materials for a period of two years from the date of original 
purchase. If the product should fail to operate correctly in normal use during the 
warranty period, Adder will replace or repair it free of charge. No liability can be 
accepted for damage due to misuse or circumstances outside Adder’s control. 
Also Adder will not be responsible for any loss, damage or injury arising directly 
or indirectly from the use of this product. Adder’s total liability under the terms 
of this warranty shall in all circumstances be limited to the replacement value of 
this product.
If any difficulty is experienced in the installation or use of this product that you 
are unable to resolve, please contact your supplier.

Safety information

•  For use in dry, oil free indoor environments only.
•  Do not use to link between buildings.
•  Ensure that the twisted pair interconnect cable is installed in compliance 

with all applicable wiring regulations. 

•  Do not connect the CATx link interface (RJ45 style connector) to any other 

equipment, particularly network or telecommunications equipment.

•  Warning – the power adapter contains live parts.
•  No user serviceable parts are contained within the power adapter - do not 

dismantle.

•  Plug the power adapter into a socket outlet close to the unit that it is 

powering.

•  Replace the power adapter with a manufacturer approved type only. 
•  Do not use the power adapter if the power adapter case becomes damaged, 

cracked or broken or if you suspect that it is not operating properly.

•  If you use a power extension cord with the units, make sure the total 

ampere rating of the devices plugged into the extension cord do not exceed 
the cord’s ampere rating. Also, make sure that the total ampere rating of all 
the devices plugged into the wall outlet does not exceed the wall outlet’s 
ampere rating.

•  Do not attempt to service the units yourself.
•  The units and power supplies can get warm in operation – do not situate 

them in an enclosed space without any ventilation. 

•  The units do not provide ground isolation and should not be used for any 

applications that require ground isolation or galvanic isolation.

Summary of Contents for AdderLink X-DVI
















Reviews: