8
To connect the link cables
The links between the transmitter and receiver modules are made using
between one and four twisted pair cables, specified to Category 5 or higher.
Each cable carries video signals and power to each receiver module.
1 Attach the connector of the first link cable (no longer than 150m, 492 feet)
to the socket labelled
LINK1
on the transmitter. There should be a click when
the cable is fully inserted and locked in place.
2 Attach the connectors of the remaining link cables (no longer than 150m,
492 feet each) to the sockets labelled
LINK2
to
LINK4
, as required.
IMPORTANT: The signals and power connections sent through the link
cables are NOT compatible with standard networking equipment
and could cause damage if connected. Do not connect the
transmitter or receiver modules to any other devices.
CATx LINKS UP TO 150m (492 feet)
LPV154
LPV150R
LPV150R
LPV150R
LPV150R
Link
cables to
the receiver
modules
Note: All of the link ports are independent. The receiver modules may be
connected, disconnected or swapped around in any order without affecting the
operation of other modules.