10
Connections at each receiver module
To connect the link cable and video display
The link from the transmitter to each receiver module is made using a twisted
pair cable, specified to Category 5 or higher at a maximum length of 150 metres
(492 feet).
NOTE: Where possible, avoid laying the twisted pair link cable(s) alongside
power cables.
1 Attach the connector of the link cable to the socket on the receiver module.
There should be a click when the cable is fully inserted and locked in place.
2 Attach the VGA connector of the module to the input socket of the video
display.
No power input is required for the module.
If the video image requires adjustment, please refer to the section
Video
sharpness adjustment
.
IMPORTANT: The signals and power connections sent through the link
cables are NOT compatible with standard networking equipment and
could cause damage if connected. Do not connect the transmitter or
receiver modules to any other devices.
Link cable from the
transmitter module
VGA input
connector on
video monitor
AdderLink
LPV150R module