32
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
Fur
T
her
INF
orm
A
TI
o
N
INDEX
mouse
Control
This option displays a mouse control dialog and is useful when the remote cursor is
failing to respond correctly to your mouse movements, even after using the Resync
mouse option.
The mouse control dialog allows you to control the remote mouse cursor using a
selection of buttons that you click with your local mouse.
Controls
When clicked, this button reveals a menu of options
concerned with keyboard, video and mouse operation.
single mouse mode
This mode is for fast network connections where the cursor
response is sufficient to provide instant visual feedback on
the remote screen. When enabled, the cursor is ‘captured’
within the viewer window until you use the ‘escape’ hot keys.
To quit from single mouse mode, press F8 and then P.
Alternatively, enable and use the mouse button escape
sequences - see
Advanced unit configuration
for details.
The single mouse mode does not require calibration.
resync mouse
This option has the same effect as the
button on the menu bar and re-synchronizes
the local and remote mouse pointers.
Refresh Screen
This option refreshes the whole screen image to remove any artefacts from moved
screen items. This is useful when using very low refresh rates on slow speed
communication links.
Click to move the
remote mouse cursor up,
down, left or right
Click to calibrate the
remote mouse
Click to produce a single
mouse click for the left,
centre or right mouse
buttons
Click to produce a
continuous mouse click
and hold for the left,
centre or right mouse
buttons
When ticked the unit
will attempt to switch to
Absolute mouse mode
(recommended). If the
computer does not
support this then it will
display a warning and
return to relative mouse
mode.
Click to
display the
Advanced mouse
Configuration
dialog. see next
page.